Console won’t turn on
No power at all, or a shutdown seconds after boot — the most common reason a board lands on this bench.
More on no-power triage →No power, liquid damage, a botched repair, or a fault nobody else will touch — this is component-level work done under the microscope, not a board swap. We fix boards other shops replace, by mail, anywhere in the US.
Quote-based$50 deposit, credited toward your repair
Start a RepairDescribe the fault in the repair request form. We review every submission first — if it's not worth your money to ship, we'll tell you before you spend anything.
Your board goes under the microscope. We trace the fault to the failing component — shorted rails, blown fuses, corroded traces, damaged ICs — instead of condemning the whole board.
You get an emailed quote with photos of the fault we found, and photos of the finished work before the balance is due. Nothing proceeds until you approve the quote, and your $50 deposit is credited toward your repair.
The failed components are replaced under the microscope, corrosion is cleaned, and traces are rebuilt. The console is then tested to its full output before it ships back.
Straight answer policy: not every board is worth fixing. If diagnosis shows a repair that doesn't make economic sense, we say so — your deposit is refunded and the console comes back to you.
Quote-based $50 deposit, credited toward your repair
Diagnosis is always free. The $50 deposit you pay after approval is credited toward your repair, so $50 of the bench work is already covered when you approve the quote.
Turnaround is typically 2–3 business days on the bench once your deposit and console arrive, plus shipping. Complex board faults can take longer — you'll know from the quote.
Student-owned and operated — students get 10% off with a .edu email, any school, not just MSU. Mention it when you submit your repair request.
You get a firm price in writing, with photos of the fault, before any work happens. Diagnosis itself is free, and the $50 deposit is credited toward the repair total.
Then you do not pay for a repair. If a board is not repairable — or is not worth repairing — we say so, refund your deposit in full, and send the console back to you with photos and an explanation of what we found.
Yes. Failed prior repairs are a large part of this bench: we inspect what was done, rebuild lifted pads and torn traces, and quote the real fix instead of working around it. We fix boards other shops replace.
Often, if it is caught before the corrosion spreads. We clean the board, trace the shorted rails, and replace what actually failed. If the damage is too far gone for the repair to make economic sense, we tell you that instead of taking your money.
PS5, Xbox Series X and S, Nintendo Switch, and Steam Deck — all quote-based at the board level. If you are not sure whether your fault is a candidate, describe it in the repair request; we review every one before you ship anything.
No power at all, or a shutdown seconds after boot — the most common reason a board lands on this bench.
More on no-power triage →Spills and corrosion are board-level work: clean the board, trace the shorted rails, replace what actually failed.
More on liquid damage repair →A flat-priced example of the same fine-pitch chip work — $239 for the HDMI port and the retimer IC together.
More on PS5 retimer repair →Free diagnosis, 90-day warranty, photo proof before you pay — and you don’t ship anything until we approve your request.
Start a Repair